Form

Skip to form

General Information

Does your process currently use separation equipment?

Yes

Feed

The feed is the product that is going into the process.

Viscosity is most like...

The Feed Material...

Temperature (°F)

Temperature (°F) in which the viscosity was measured

pH value

The pH value of the feed material

Specific Gravity

What is the specific gravity of your product? An easy way to determine this would be to measure out 100 milliliters of the liquid, then weigh it. For example, water has a specific gravity of 1.0

Volume Split

What is the volume/volume split of the separated product? If the material is allowed to naturally separate, how much light liquid is there, and how much heavy liquid is there? Example, 80% light liquid, 20% heavy liquid, trace of solids on the bottom.

Light Liquid (%)

Heavy Liquid (%)

Bottom Solids (%)

Separated Product

Please take a moment to describe the product you wish to process.

Light Liquid

Light liquid is the liquid left floating on top after separation.

Viscosity is most like...

Temperature (°F)

pH value

Specific Gravity

The Light Liquid...

Is Toxic / Poisonous

Is Corrosive

Is Erosive

Can Foam

Heavy Liquid

Heavy Liquid is the liquid left underneath the light liquid.

Viscosity is most like...

Temperature (°F)

pH value

Specific Gravity

The Heavy Liquid...

Is Toxic / Poisonous

Is Corrosive

Is Erosive

Can Foam

Contains suspended solids. (Solids not dissolved in solution or in the liquid)

Bottom Solids

Heavy solids are also known as desludge solids or sedimented solids.

Specific Gravity

pH value

The Bottom Solid is...

Slimy

Irregular

Abrasive

Soft

Free Draining

Operating Conditions

Boiling Point of the Feed Product

Minimum Desired Processing Temperature (F)

Desired Processing Temperature (F)

Maximum Desired Processing Temperature (F)

Results Desired

Please use this section to inform us about the results you want to get from the separation process.

Which component of separation is valuable?

What is the maximum percentage of liquids wanted or allowable in the solids? (%)

What is the maximum percentage of solids wanted or allowable in the liquids? (%)

What is the maximum amount of Light Liquid in Heavy Liquid?

What is the desired capacity of your process?

Additional Information

Tell us of any other important information regarding your process.

Contact Information

First Name*

Last Name*

Company Name*

Email*

Phone Number*