Skip to form
Automation Academy Quiz
First name
*
Last name
*
Email
*
Company name
*
1. How many people are recommended to remove Cobi from the box?
*
1 Person
2 People
3 People
4 People
2. What should you do with the box once Cobi is unpacked?
*
Throw it away
Recycle it
Save it for later use
Nothing
3. What do you need to do in order to charge Cobi?
*
Turn OFF the battery power
Ensure the battery power is ON and plug it in
Close the machine lid and handle
Install all the consumables
4. What should you do to prepare your space before running Cobi?
*
Pre-sweep the floor
Remove any large obstructions
Remove floor mats
All of the above
5. What are the TWO things to look for when choosing a spot to hang your HLC code?
*
Place the HLC in a spot where Cobi will have to go through doors
Look for a spot on the wall where other utilities or signage already exist, so the HLC blends in
Look for a spot where Cobi can make a full left or right turn
Select a spot in a high traffic area
6. How many inches from the ground should the HLC be placed on the wall?
*
12in
15.5in
23-24in
29in
7. What are TWO things you need to do to map an efficient route?
*
Map a zone that is under 5,000 square feet
Map during high-traffic times
Consider splitting your area into zones
Leave large obstacles in the path you want to map
8. What are the TWO recommendations for cleaning high-traffic or high-spill areas? (Select all that apply)
*
Don’t use Cobi in those areas
Run the route on repeat by selecting the number of times you want to run the route (located on the Eco/Max screen)
Leave those areas for the end of the route
Map those areas into more than one zone
9. What types of turns should you try to make when mapping a route?
*
Sharp turns
Sweeping turns
90-degree angle turns
Abrupt turns
10. Why is it good to overlap passes when mapping an area?
*
So, Cobi stays on the correct route
To save battery life
To improve cleaning performance
None of the above
11. What color is the debris basket and how often should it be cleaned?
*
Yellow, every day
Orange, never
Green, once every two weeks
Blue, once a month
12. What parts need to be cleaned every day when using Cobi?
*
Debris hopper
Debris basket
Squeegee
Recovery tank
All of the above
13. How often should the sensors on Cobi be wiped down?
*
Once a week
Once a month
Every 6 months
Never
14. What are the TWO most important things to do before leaning Cobi on its back?
*
Power down the machine
Remove the recovery tank and dry up any water from the solution tank filter housing
Take all consumables off the unit
Place a towel in the tank base covering the holes
15. What do you need to double-check before running Cobi?
*
Make sure the main brush is seated properly
Make sure the hopper is properly installed
Make sure the lid is closed tightly, it has to click into place
All of the above
16. What is the purpose of tipping Cobi on its back?
*
To clean the cliff sensors
To clean the undercarriage of the main brush
To double-check the main brush is installed correctly
All of the above
17. Where do you open the side brush access doors?
*
On the right and left side of the bottom of the machine there are yellow arrows and an “open here” sticker. Place your hand underneath the bottom of the machine and gently click open the side brush door.
You must tip the machine on its back to access the side brushes
There are no side brush access doors
None of the above
18. True or False: You must add water to the solution tank before you run Cobi for it to work properly.
*
True
False
Submit